• Language

    Download App

    Ubox

    look for "Ubox" in Google Play or App Store and download it.

    Please select your phone system.

    First use for 4G version

    Step1：Insert SIM card

    a. Use the supplied screwdriver to open the camera insert cover.

    b. Find the SIM card and insert him into the camera. (You can also use your cell phone SIM card)

    Note: Cameras sold to the United States and Canada come with a SIM card by default; for users in other regions, please purchase your own SIM card.

    c. Note: The orientation of the SIM card.

    Step2：Please make sure the solar panel battery is fully charged.

    a. Please make sure the solar panel battery is fully charged before you go to install it.

    b. Green LED flashing - charging; green light is always on - the battery is fully charged.

    c. If the battery is not fully charged, use a USB power source to charge the panel separately.

    d. Yellow light - panel has power output to the camera; red light - battery health.

    Step3：Connecting the panel to the camera

    a. Connect the camera to the panel as shown in the figure.

    b. After pressing the switch on the panel, check the camera's indicator. When the blue light of the camera indicator stays on, open the APP to add the camera.

    Step4：APP add device

    a. Open ubox, select 4G device and use your phone to scan the QR code at the bottom of the camera.

    b. Wait to be added.

    FAQ

    1、 How do I reset the camera?

    When the camera starts, press and hold the reset button until the camera sounds "reset".

    2、How to install and use?

    Correct:The installation is perpendicular to the direction of human walking.

    Note: Installation height 3m (10ft), please do not install too high, airflow will cause the camera false trigger alarm.

    Error: Installation is parallel to the direction of human walking.

    Error:  Don't point directly at tree installation.

    3、How to set PIR？

    OFF: When the battery is low, you can turn off the PIR to reduce the power consumption and wait for the panel battery to be filled again before turning on.

    High sensitivity: Alarm when someone stays in the monitored area for more than 2 seconds.

    Medium sensitivity: Alarm when someone stays in the monitored area for more than 5 seconds.

    Low sensitivity: Alarm when someone stays in the monitored area for more than 7 seconds.

    4、 How is the camera offline resolved?

    a. Check if the camera blue light is on?

    b. Check if the panel orange light is on? Check if the battery is fully charged?

    c. Check if the SIM card is topped up with traffic?

    Note: Due to laws and regulations, the device needs to be reported before it can be used, please contact your local SIM card provider to replace the legal SIM card.

    5、 Solar Panel Indicator Definition

    Red light
    On: The battery voltage is normal (above 2V)
    Off: The battery is abnormal.
    Green light
    Flashing (1 flash per second): charging (battery voltage between 2.8-4.0V)
    Flashing quickly (1 flash every 0.5 seconds): charging failure
    Slow flash (1 flash in 2 seconds): The battery voltage is below 2.8V.
    Always on: The battery voltage is above 4.0V.
    Orange light
    On: there is output voltage
    Off: No output voltage

    6、 The camera's indicator

    Red LED
    Camera start-up
    Blue LED
    Blue LED blinking: waiting for networking
    Blue LED stays on: camera is on the network
    Blue LED blinks slowly: SIM card has no traffic

    7、 After charging the SIM card traffic, the camera still can't connect to the network?

    a. Press the panel switch once again to power down the camera and restart it.
    b.Or wait for 2 hours, the camera will automatically connect to the network.